CTSPlanner
Sign-in not configured
← Mechanics

MEC2020 Vehicle Maintenance

Intermediate · 1 credit · TMT - Trades, Manufacturing and Transportation

Description
Students perform the basic service requirements necessary to ensure adequate maintenance of a motor vehicle.
Prerequisite
MEC1020: Vehicle Service & Care
Parameters
Access to vehicles, specialty tools, hand tools and related resources. Note: Customer work is to be checked by a certified technician when work is performed on brakes, steering and suspension.

Outcomes The student will:

  • 1 demonstrate safe work practices when working with vehicles and follow established laboratory procedures

    • 1.1 demonstrate knowledge of and follow laboratory safety procedures

  • 2 identify vehicle service requirements as per manufacturer’s recommendations

    • 2.1 identify the service requirements for a specific motor vehicle considering the odometer reading, conditions of operation and service history

  • 3 conduct a motor vehicle inspection considering the age of the vehicle, distance travelled, service conditions and history

    • 3.1 check tire condition

    • 3.2 mount and balance tires

    • 3.3 rotate tires to maximize wear life

    • 3.4 inspect steering and suspension system components

    • 3.5 inspect, repack and adjust wheel bearing

    • 3.6 lubricate steering and suspension system joints

    • 3.7 replenish fluids in power steering pump

    • 3.8 inspect and top-up brake fluid reservoir

    • 3.9 inspect and assess the wear characteristics of disc brake and drum brake components

    • 3.10 lubricate parking brake linkages

    • 3.11 inspect and service battery and battery clamps; renew clamps, if required

    • 3.12 adjust alternator belt tension, if necessary

    • 3.13 check the operation of all lights and replace bulbs, if required

    • 3.14 inspect fuse panel and renew inoperative fuses

    • 3.15 use a multimeter to test a charging system

    • 3.16 lubricate hinges on all opening panels and weatherstrips

    • 3.17 lubricate locks or lock plates, as required

    • 3.18 inspect and change windshield wiper blades, if necessary

    • 3.19 inspect for loose trim or mouldings

    • 3.20 identify and describe the condition of the camshaft timing belt or chain and recommend the appropriate service

    • 3.21 evaluate brake system fluid integrity and brake pedal feel and identify repair requirements

  • 4 service and repair a motor vehicle according to vehicle condition and service schedule

    • 4.1 demonstrate how to:

      • 4.1.1 inspect an engine for oil leaks

      • 4.1.2 renew engine gaskets or seals, where necessary

      • 4.1.3 change engine oil and filter

      • 4.1.4 service Positive Crankcase Ventilation (PCV) valve and breather

      • 4.1.5 inspect the condition of coolant, hoses, belts, fan and radiator; adjust belts, if required

      • 4.1.6 change or recondition the engine coolant and flush the cooling system, if required

      • 4.1.7 pressure test the cooling system

      • 4.1.8 replace the thermostat, if necessary

      • 4.1.9 locate and inspect the fuel filter; replace, if required

      • 4.1.10 replace the air filter, if required

      • 4.1.11 inspect and service throttle linkage

      • 4.1.12 inspect manifolds, pipes, catalytic converter, muffler and hangers for structural integrity; repair, as required

      • 4.1.13 inspect and service or replace spark plugs, distributor cap and rotor, and replace spark plug wires and boots, as required by the service schedule

      • 4.1.14 inspect and replace fuel purge canister filter, if required

      • 4.1.15 inspect and replace fluids, as required, in transmissions, transaxle transfer cases and differential assemblies

      • 4.1.16 inspect and recommend service for constant velocity joints, seals, drive shaft, drive axles and U-joints

  • 5 demonstrate basic competencies

    • 5.1 demonstrate fundamental skills to:

      • 5.1.1 communicate

      • 5.1.2 manage information

      • 5.1.3 use numbers

      • 5.1.4 think and solve problems

    • 5.2 demonstrate personal management skills to:

      • 5.2.1 demonstrate positive attitudes and behaviours

      • 5.2.2 be responsible

      • 5.2.3 be adaptable

      • 5.2.4 learn continuously

      • 5.2.5 work safely

    • 5.3 demonstrate teamwork skills to:

      • 5.3.1 work with others

      • 5.3.2 participate in projects and tasks

  • 6 identify possible life roles related to the skills and content of this cluster

    • 6.1 recognize and then analyze the opportunities and barriers in the immediate environment

    • 6.2 identify potential resources to minimize barriers and maximize opportunities

Program of Studies 2009. Source document, © Alberta Education.